Round Plane Antenna 34W Dimmer Motion Sensor Ceiling Mounted Design
Round Design Plane Antenna For Ceiling Light Dusk Dimmable Motion Sensor
Features:
1. Constant current output.
2. On/off control by relay.
3. Tri-level control by 1-10V output.
4. Suitable for ceiling lights and Bulkhead.
5. Sensitive and reliable
6. IP 20 and 3 years warranty.
Technical data:
| Model number |
HT30V |
| Input voltage |
220-240VAC,50Hz/60Hz |
| Input current |
0.15A Max |
| Input power |
34W Max |
| Output LED current |
0.45A/0.55A/0.60A/0.70A±5%
|
| Output LED voltage |
24V-52V DC
|
| Output LED power |
18-30W
|
| Stand-by power |
<0.5W(230VAC)
|
| Empty load voltage |
≤55V DC |
| Power factor |
≥0.9 |
| Efficiency |
≥85% (Max.)
|
| Microwave frequency |
5.8GHz±75MHz |
| Microwave power |
<0.3mW |
| Detection area |
50%/100% |
| Hold time |
5s/60s/5min/10min |
| Daylight threshold |
2Lux/10Lux/50Lux/Disable |
| Stand-by period |
0s/10s/10min/+∞ |
| Stand-by dimming level |
10%/30% |
| Mounting height |
2.5-6m /8.2-19.68ft(ceiling mounted)
|
| Deteation range |
Max.ø14m (ceiling mounted)
|
| Motion detection |
0.5–1.5m/s |
| Packing method |
①the bubble pack,
②paper flat,
③outer carton(400*300*236mm)with drying agent(The sensor 100pcs/carton,gross weight 9.78kg)
|
| Detection angle |
30°-150° |
| Operating temperature |
Ta: -20°C~55°C Tc: 85°C
|
| Abnormal protection |
SCP:Auto recovery,OVP,OCP,OTP |
| EMC standard |
EN55015 |
| Safety standard |
EN61347-1 EN61347-2-13 EN60598-1 |
| IP rating |
IP 20 |
| Warranty |
3 years |
|
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Output Current
level Period
Dtection Area:
The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-6M.
Wiring diagram:
Output current setting:
Set the current to be 350mA by plugging black cap on 1 and 2 PIN,and 300mA by plugging on 2 and 3 PIN.
Setting:
1: Detection area:
In this area, movement will be detected and able to trigger the sensor. 100% detection area is also known as the strong sensitvity.
2-3: Hold time:
The period of light keeping 100% brightness after moving objects leave the detection area.
4-5: Daylight threshold:
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable", the sensor works everytime it detects motion regardless the ambient brightness.
6-7: Stand-by period:
The period of light keeping low output before it's completely switched off. When it's preset as"∞“, the light always keep at low output if no movement in the detection area and doesn't turn off.
8: Stand-by period:
The definition of low output in the standby period.
Daylight periority:
Dusk/Dawn sensor:
Our special active photocell technology can tell the difference between natural light and LED light, to
ensure the light will be off when needed.
With Daylight priority function, HT30V is able to differentiate artificial light brightness from
natural light after installed inside the fixture, and automatically turn off light when ambient
brightness exceeds preset lux level.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10% or 30%;
3. Daylight threshold is on 2Lux, 10Lux or 50Lux.
Lux on/off:
Light automatically With insufficient Lights dims to standby Light off when
on when ambient ambient brightness level if no motion ambient lux level is
brightness is lower light dims to 100% detected after higher than preset
than preset lux level. when motion holdtime. Lux mount.
detected.
Application:
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".
With sufficient daylight,even With insufficient daylight, After the last detection and the
when motion detected,light when motion detected, present hold time elapsed,
remains OFF. light ON. light OFF.
2. No daylight function:
The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.
When motion is detected, After people leave the After the last detection and
the sensor will switch on the detection area,light remains the present hold time
light to 100% brightness. 100% brightness within elapsed,light OFF.
hold time.
3. Function demo-dimable control/corridor function
With sufficient daylight,even With insufficient daylight, After the last detection the light
when motion detected,light when motion detected, will be dimmed down to the
remains OFF. light ON. stand-by dimming level
(10% or 30%)after hold time
Product Tags:
|
|
Round Plane Antenna 34W Dimmer Motion Sensor Ceiling Mounted Design Images
|
